./prontouso.com

RUMAH & DIY

Kalkulator Waktu Pakai Baterai (Runtime)

Hitung berapa lama baterai (Ah / mAh) atau sistem cadangan daya UPS dapat menyalakan perangkat elektronik berdasarkan tegangan (Volt) dan daya konsumsi beban (Watt).

Status alatBerjalan di browser Anda
Pratinjau

Kalkulator Daya Tahan Baterai

Hasil

Energi total
1200 Wh
Energi yang dapat digunakan
864 Wh
Perkiraan daya tahan
8h 38min

Cara kerja

  1. Masukkan data Anda

    Isi nilai yang diperlukan, tempel teks Anda, atau unggah file yang ingin diproses.

  2. Lihat hasil seketika

    Sebagian besar alat diperbarui secara langsung saat Anda mengetik; beberapa menggunakan satu tombol tindakan.

  3. Gunakan hasil Anda

    Salin, unduh, atau bagikan hasil yang dihasilkan — Anda selalu memiliki kendali penuh atas data Anda.

Privasi dan pemrosesan data — Berjalan secara lokal di browser Anda. Alat ini tidak mengunggah data Anda.

Apa itu Kalkulator Waktu Pakai Baterai (Runtime)?

Enter a battery's capacity and voltage, your load, and how deeply you're willing to discharge it to estimate how long it will run.

PAHAMI CARA KERJA ALAT

How to estimate battery runtime

The formula

Formula
runtime_h = (Ah × V × DoD × efficiency) / load_W

Depth of discharge, explained

Depth of discharge (DoD) is how much of a battery's rated capacity is safe to actually use. Lead-acid batteries are typically limited to 50% DoD to preserve their lifespan; lithium (LiFePO4) chemistries tolerate 80–100% DoD without significant degradation.

How to use it

  • Enter the battery's capacity in amp-hours and its voltage.
  • Enter the load in watts (from the device's rating, or amps × volts).
  • Set the depth of discharge and system efficiency for your setup.

Worked example

100 Ah, 12 V battery with a 100 W load

At 80% DoD and 90% efficiency, runtime is about 8.6 hours.

100 * 12 * 0.8 * 0.9 / 100 = 8.64 h

Battery runtime note

Capacity, load, DoD, and efficiency values stay local. Real runtime also depends on battery age, temperature, discharge curve, and manufacturer limits.

Pertanyaan yang Sering Diajukan (FAQ)

What DoD should I use for my battery?

About 50% for lead-acid (flooded or AGM), and 80–100% for lithium (LiFePO4) — check your battery's datasheet for its specific recommendation.

Does temperature affect real-world runtime?

Yes, meaningfully — cold temperatures reduce a battery's effective capacity, sometimes substantially. This calculator assumes room-temperature, rated capacity.

What does "system efficiency" account for?

Losses in the inverter (if you're running AC loads) and wiring between the battery and the load — 90% is a reasonable default for a well-sized system.

Why is usable Wh lower than total Wh?

Usable energy is reduced by depth of discharge and system efficiency, because not all rated battery energy should or can reach the load.

Alat Terkait