./prontouso.com

RUMAH & DIY

Kalkulator Material Decking Kayu Lantai

Hitung estimasi kebutuhan material untuk membangun lantai decking kayu teras: luas permukaan m², jumlah papan decking, balok penyangga (joist), dan jumlah sekrup pengikat.

Status alatBerjalan di browser Anda
Pratinjau

Dimensi dek

Papan dek

Tangga opsional

Hasil

Luas dek
192 ft²
Baris papan dek
26
Jumlah papan per baris
1
Panjang linear papan dek
416 ft
Jumlah papan utuh yang harus dibeli
29
Balok penyangga
13
Panjang tiap balok
12 ft
Total panjang balok
156 ft
Panjang papan tepi
56 ft
Pengencang dek
676

Estimasi perencanaan. Tata letak papan, blocking, balok utama, tiang, railing, bentang lokal, dan persyaratan peraturan bangunan harus dikonfirmasi untuk proyek ini.

Cara kerja

  1. Masukkan data Anda

    Isi nilai yang diperlukan, tempel teks Anda, atau unggah file yang ingin diproses.

  2. Lihat hasil seketika

    Sebagian besar alat diperbarui secara langsung saat Anda mengetik; beberapa menggunakan satu tombol tindakan.

  3. Gunakan hasil Anda

    Salin, unduh, atau bagikan hasil yang dihasilkan — Anda selalu memiliki kendali penuh atas data Anda.

Privasi dan pemrosesan data — Berjalan secara lokal di browser Anda. Alat ini tidak mengunggah data Anda.

Apa itu Kalkulator Material Decking Kayu Lantai?

Calculate deck materials online in imperial or metric units. Estimate deck boards, linear length, joists, rim boards, fasteners, waste, and stair treads.

PAHAMI CARA KERJA ALAT

How to estimate deck materials

Estimate decking boards, rows, joists, rim boards, fasteners, waste, and optional stair decking from project dimensions.

Board layout

Board direction determines both row count and framing direction. The calculator uses actual board face width plus the selected gap, then respects the purchased stock length so every row can be assembled from whole pieces.

Framing estimate

Joists are counted on center across the direction in which boards run. Total joist length and the perimeter rim-board length are listed separately for easier purchasing.

How to use it

  • Choose imperial or metric units and enter deck dimensions.
  • Enter board width, gap, stock length, direction, and joist spacing.
  • Add waste and optional stair measurements.
  • Review full boards, framing lengths, and fastener estimates.

Calculated locally

All project dimensions and material estimates remain in your browser and are never uploaded.

Pertanyaan yang Sering Diajukan (FAQ)

Does the board count include waste?

Yes. The selected waste percentage applies to deck and stair decking. The result also enforces a minimum number of whole pieces for each row.

Are beams, posts, and railings included?

No. Their sizing and quantity depend on height, spans, loads, footing conditions, layout, and local code, so they need a project-specific design.

Why is joist spacing measured on center?

On-center spacing is the standard distance from the centerline of one joist to the centerline of the next.

Alat Terkait